Pabrik Penghasil Hidrogen H2 Kemurnian Tinggi 99,9999% dengan Kapasitas 3000 Nm3/jam dan Sistem Perengkahan Metanol Konsumsi Energi Rendah
| Capacity: | 50-3000 Nm3/jam | Purity: | 99%-99,9999% |
| Operate Pressure: | 0,8-2,5 Mpa(g) (dapat disesuaikan) | Raw material: | Metanol |
| High Light: | Pabrik Produksi Metanol,proyek metanol,Perengkahan Metanol Kemurnian Tinggi |
||
- Teknologi produksi yang matang dengan operasi yang aman dan andal
- Bahan baku yang mudah diakses dengan harga yang stabil dan transportasi dan penyimpanan yang nyaman
- Aliran proses singkat dan sederhana
- Konsumsi energi dan biaya produksi yang rendah
- Pendudukan tanah dan investasi minimal dengan laba atas investasi yang cepat
- Operasi sederhana dengan otomatisasi tinggi
- Ramah lingkungan tanpa polusi
| Kapasitas Produksi | 50-3000 Nm3/h |
|---|---|
| Kemurnian produk | 99%-99.9995% |
| Suhu | Lingkungan |
| Tekanan produk | 0.8-2.5 MPa ((g) |
Peralatan produksi hidrogen dengan kapasitas 5-20 Nm3/jam dan operasi sepenuhnya otomatis
Methanol Cracking Hydrogen Production Equipment Low-Cost Hydrogen Generator 5-20 Nm3 per Hour Low-Cost Methanol Cracking Hydrogen Production Equipment Our methanol cracking hydrogen production equipment converts industrial methanol into high-purity hydrogen through an efficient catalytic decompositi...
120kW Nominal Output Methanol Fuel Cell Generator dengan Zero Emission Clean Energy dan Ultra Low Electricity Cost
High-Efficiency Methanol Fuel Cell Generator 2.5kW-120kW Methanol Fuel Cell Generator System (FCS) represents the next generation of clean energy technology. By seamlessly integrating advanced methanol steam reforming with high-performance proton exchange membrane fuel cells (PEMFC), this system ...
99%-99.9999% Purity Methanol Cracking Hydrogen Generation Unit Description: 1. Production Scale:50~5000Nm3/h 2. Product Purity:99%~99.9995% (v/v) 3. Temperature:Ambient 4. Pressure: 0.8~2.5MPa(G) Beside endothermic gas or endo gas, more and more methanol is used for the thermal treatment of metals ...
Hydrogen Production Methanol Cracking System For Bell Type Furnace Annealing Beside endothermic gas or endo gas, more and more methanol is used for the thermal treatment of metals as a protective gas. The methanol is directly insirted into the furnace and cracked there. CH3OH → CO + 2 H2 Carbon ...
